Connections – Source Audio Hot Hand 3 Universal Wireless Adapter User Manual
Page 4
4 | Connections
Connections
The receiver can be connected to any effects pedal that has the ap-
propriate input jacks. This includes the Sensor Input or Multi-Function
Input on all Soundblox pedals and any other manufacturer’s pedal
that has a
1
⁄
4
-inch expression input. If the receiver is connected via
the SA160 sensor cable, it will be powered through this connection. In
order to send an output signal on the Expression Output, the receiver
unit will need powered by the included DC adapter power supply.
The knobs and MODE LED will be illuminated when the receiver is
powered. The blue STATUS LED on the face of the receiver will blink
indicating that the receiver is looking for a ring to pair up with.
1
⁄
4
-inch
Expression
OUTPUT
1
⁄
8
-inch Sensor
OUTPUT