Cooper Lighting McGraw-Edison PSL - Manual (Page 9)

specification features
ANTENNA GUARD
Cast low copper marine-grade
aluminum is precision formed.
Extra-heavy wall thickness (min. 0.44")
provides exceptional protection from
car antennas and vandalism.
LIGHT TRESPASS SHIELD
Cast low copper (min. 0.187")
marine-grade aluminum with
extra-heavy wall thickness provides
exceptional light control in 90º horizontal
segment. Light is cutoff in the 57º to 90º
vertical angle. Installs with two (2)
screws.
TORSION SPRINGS
Relamping springs allow the refractor to be retained during
relamping. Springs hold weight of refractor while
releasing/tightening access screws.
LENS GASKETS
Liquid injection molded
silicone gasket provides
continuous seal
between housing and
refractor assembly.
EASY ACCESS
The PSL’s optical housing can be
easily removed for access to
electrical components.
MOUNTING
Choice of either quick J-box
mounting with circular J-box
plate (standard) or four (4)
1/2" conduit taps with CT
options. Mounting plate has
alignment arrows for proper
orientation. Fits standard 4"
J-box. Fixture locks into place
without tools.
TAMPER-PROOF
One tamper-proof screw
releases entire fixture for
field maintenance. Entire
fixture does not need to be
disassembled for removal
when used with J-box
mounting.
GLARE GUARD
Internal faceted specular aluminum reflector with 95% total reflectivity redirects
a 60º horizontal segment of light along the driving lane and into parking stalls.
Installs without tools internal to refractor into preset locations for single- and
double-row installations.
specification features
HOUSING
Die-cast, low copper, marine-grade alloy
(A360) aluminum is precision formed. Extra
heavy wall thickness (min. 0.123") housing
provides exceptional heat sinking to keep
components cool. Screw bosses are cast into
back of housing for structural integrity.
BALLAST
HID—HPF, -20º starting Dual-Tap standard. For use
with up to 175W Metal Halide lamp, 150W High
Pressure Sodium or 85W QL Induction.
OPTICS
Molded tempered borosilicate glass
refractor. Glass shock-absorbing system
consists of 16 gauge steel ring to support
the full round lens; the lens floats on the
injection-molded silicone gasket for
additional protection. Main specular
aluminum reflectors are one-piece spun
and uplight window provides a wide
distribution of uplight.
SOCKET
HID—4KV pulse rated
medium-base with
nickel-plated screw shell.
WIRING
Plug Ease ™ wiring system; lead wires
are encased in a liquid injection-molded
silicone gasket, which provides water-and
dust-tight seal between housing and
junction box.
HARDWARE
Stainless steel Philips head fasteners.
Recessed screw heads on casting.
Fasteners are captive in the die-cast
during relamping and sealed via
silicone gasket. Gaskets compress
for proper sealing.
FINISH
Fixture is painted white to minimize contrast borders
between the fixture and the ceiling plane, allowing the
units visual luminance to blend in. Premium TGIC
textured thermoset polyester powder coat finish
protects and provides a durable, rugged finish. 500-hour
salt spray test. Applied in a five-stage finishing process.
LABELS
cUL listed for wet locations in all
mounting positions; IP65 rated.
LENS GASKETS
Liquid injection-molded silicone gasket provides
continuous seal between housing and refractor
assembly.