Solvline LemonIDE Ver 1.0c - Manual (Page 32)

LemonIDE TM
Chapter 5. Using IDE
5.4.4 Configuring Debugger
Select “Debugger” tab and add debugger to be used.
Debugger : Select debugger type.
Select “Esto GDB Server”for LemonIDE Windows and
“LemonIDE GDB Server”for LemonIDE Linux.
GDB Debugger : Assign path of the selected debugger execution file.
Select “c:\cygwin\opt\lemoix\lib\arm-linux-estogdb.exe” with LemonIDE in Windows
environment and “/opt/lemonix/arm-linux- lemonidegdb” in Linux environment
Type : Select communication method to exchange debugging data between LemonIDE
and target system, Eddy.
Current version LemonIDE supports only “TCP” and “Serial” is not yet supported.
Select any port number except for “2004” port reserved for Eddy.
Prefix of absolute shared library path : In order to use a debugger, Target system’s root file system must also be
installed in Host system. Root file system’s /lib and /usr/lib libraries must be present in
order to perform debugging operation. Target system’s libraries must be present under Host
system’s /lib directory in order to perform Target system debugging. Library path for
shared library is “c:\cygwin\opt\lemonix\cdt\arm-linux-gnueabi”for LemonIDE
Windows and “/opt/lemonix/cdt/arm-linux-gnueabi” for LemonIDE Linux.
5-8