Solvline TestView - Manual (Page 25)

Chapter 5. File Transfer Menu TestView
5-2
5.2.1 COM Port
You can configure COM Port settings in COM Port category.
y Port Number: Select port number
y Baud Rate: Select baud rate
y Parity: Select parity bits
y Data Bits: Select Data bits.
y Stop Bits: Select stop bits
y Flow Control: Select flow control option.
5.2.2 Transfer Option
You can configure transfer options in Transfer Option category. Options are different between File Send
and File Receive.
z File Send
y File Path: Select the path of the file that will be transferred
y Protocol: Select file transfer protocol
z File Receive
y Destination: Select the destination where the transferred file will be saved
y Protocol: Select file transfer protocol