Solvline TestView - Manual (Page 19)

Chapter 4. Port Menu TestView
4-7
4.2 TCP/UDP Port
This option allows testing TCP Server/Client and UDP protocols.
4.2.1 Opening Ports
Select Port Æ TCP/UDP Port from the menu.
4.2.2 Open TCP/UDP Port Configuration
Set connection type, protocols, IP Address, Start port, and Quantity.
z “Open TCP/UDP Port” Options
y There are four Connection Type options available.
TCP Client : Connect to the remote TCP server. Set server’s IP address and the port.
TCP Server : Run the TCP server with the PC. PC’s IP address is used by the server.
UDP Client : Connect to the remote UDP server. Set server’s IP address and the port.
UDP Server : Run the UDP server with the PC. PC’s IP address is used by the server.
y IP Address: IP Address
y Start Port: The beginning port number.
y Quantity: The number of ports to test.
y
Note
UDP Server/Client test details are identical to TCP Server/Client settings.
All other options are identical to COM Ports except the “Setup”menu, so refer to “
Com Ports “for
more information.