Solberg BBF Assembly - Manual (Page 3)

3 “BBF” Series Blower Base Frame Assembly Instructions Rev.:9105
SOLBERG
Solberg’s BBF Series
Blower Base Frame Parts List
Standard Solberg Supplied
Base Frame Parts
1 BBF Series Base Frame
3 Channels
1 Tensioning Channel
1 Belt Guard
Assorted Nuts and Bolts for assembly of a BBF Series 2” - 6” connection:
(16) 1/2”-13 x 1-1/2” long carriage bolts *5/8-11 x 2” long for 6” unit
(16) 1/2”-13 “whiz” nuts, (serrated flange hex nuts) *5/8-11 long for 6” unit
(2) Beaded spacer tubes 7/8” long
(6) 1/2”-13 hex nuts
(6) 1/2” standard washers
Depending on your package use either:
(2) 1/2" -13 x 7” long carriage bolts
(2) 1/2”-13 x 4 1/2” long carriage bolts
Optional Flat Washer for 3/8” bolts for smaller motors
(4) 3/8” Flat Square Washer (supplied with 2” & 2-1/2” boot kits)
Included with Belt Guard:
(4) 1/2”-13 x 1 1/2” long carriage bolts
(4) 1/2”-13 “whiz” nuts, (serrated flange hex nuts)
(9) 1/4”-20 x 1/2” long cap screws
Customer Supplied Parts
(1) PD blower
(1) Electric motor
(1) Pipe nipple (threaded one end)
(2) Bushings
(2) Sheaves
(X) Belt(s)
(X) Thread Sealant
(1) Pressure Relief (If required)