beautypg.com

Connections, Connecting headphones, Connecting a pedal – Casio PX350-ES-1A User Manual

Page 8

background image

E-6

Connections

IMPORTANT!

• Before connecting headphones, be sure to use the

Digital Piano’s VOLUME controller to turn the
volume down to a low level. After connecting, you
can adjust the volume to the level you want.

• The Digital Piano automatically adjusts sound output

to optimize for headphones (when headphones are
connected) or the built-in speakers (when
headphones are not connected).

Back

Connect commercially available headphones to the
PHONES

jacks. Connecting headphones to either of

the PHONES jacks cuts off output to the speakers,
which means you can practice even late at night
without bothering others. To protect your hearing,
make sure that you do not set the volume level too high
when using headphones.

NOTE

Be sure to push the headphones plug into the
PHONES

jacks as far as it will go. If you don’t, you

may hear sound from only one side of the
headphones.

If the plug of the headphones you are using does not
match the PHONES jacks, use the applicable
commercially available adaptor plug.

If you are using headphones that require an adaptor
plug, make sure you do not leave the adaptor
plugged in when you unplug the headphones. If you
do, nothing will sound from the speakers when you
play.

The back of the Digital Piano has two pedal jacks, one
for a damper pedal and one for a soft/sostenuto pedal.

To connect to the pedal jack

Depending on the type of operation you want the
pedal (SP-3) to perform, connect the pedal’s cable
either to the Digital Piano’s DAMPER PEDAL jack or
SOFT/SOSTENUTO PEDAL

jack. If you want to use

both operations (jacks) at the same time, you need to
purchase another optionally available pedal.

Back

NOTE

You can connect a pedal to the SOFT/SOSTENUTO
PEDAL

jack and apply either a soft or sostenuto

effect to the notes you play. For details, see “Soft/
Sostenuto Pedal Jack Setting” (page E-46).

Pedal Functions

z Damper Pedal
Pressing the damper pedal while playing will cause the
notes you play to reverberate for a long time.

Whenever a piano tone is selected, pressing this
pedal will activate the Digital Piano’s Damper
Resonance effect, which causes notes to resonate in
the same way they do when the damper pedal on an
acoustic piano is pressed.

z Soft Pedal
Pressing this pedal suppresses notes played on the
keyboard after the pedal was pressed, and makes them
sound softer.

z Sostenuto Pedal
Only the notes that are played while this pedal are
depressed are sustained until the pedal is released.

Connecting Headphones

PHONES jacks

Commercially
available headphones

Standard plug

Connecting a Pedal

PEDAL jacks

SP-3

This manual is related to the following products: