Solberg SLCR-SLCRT(Pg.2-9) - Manual (Page 4)

Solberg Manufacturing, Inc., 1151 Ardmore Itasca, IL 60143 USA
Ph: 630.773.1363 Fax: 630.773.0727 Email: [email protected] Web: www.solbergmfg.com
Page 4
No. Filter Model
Number
Replacement
Element
Initial Delta P
Readings
1
2
3
4
5
Table 1
The model number designates the silencer type and connection size. For
example, the following part number identifies the product as being
a ‘SLCR’
design side channel blower silencer with a 1 ” FPT connection size:
SLCR100
Note: The inlet connection greatly influences the overall pressure drop of the
filter system. To minimize the restriction contributed by a side channel blower
silencer, a velocity of 6,000 ft/min (10200m
3
/h) or less is suggested through the
outlet pipe. The table below lists the suggested flows based on pipe size:
Pipe Size
(inches)
Max Airflow
Pipe Size
(inches)
Max Airflow
1/2" 10 CFM 17m
3
/h 2" 135 CFM 230m
3
/h
3/4" 20 CFM 34m
3
/h 2 ½" 195 CFM 332m
3
/h
1" 35 CFM 60m
3
/h 3" 300 CFM 510m
3
/h
1 ¼" 60 CFM 102m
3
/h 4" 520 CFM 884m
3
/h
1 ½" 80 CFM 136m
3
/h
Table 3 *Note: This information is for general use only. A qualified engineer must properly design each system.
Connection
size and type
Silencer type:
SLCR
SLCRT