Solberg SLCR-SLCRT(Pg.2-9) - Manual (Page 3)

Solberg Manufacturing, Inc., 1151 Ardmore Itasca, IL 60143 USA
Ph: 630.773.1363 Fax: 630.773.0727 Email: [email protected] Web: www.solbergmfg.com
Page 3
Section A
INTRODUCTION
The purpose of this manual is instruction on the proper assembly and care of
Solberg side channel blower silencers.
*WARNING*
This manual must be read and thoroughly
understood before using and caring for this
air filter. Failure to comply could result in
explosion, product/system contamination
or personal injury.
This manual should be used as a supplement to the user’s understanding of the
proper care needed to maintain a safe and dependable silencer. It is the
responsibility of the user to interpret and explain all instructions to persons who
do not read or understand English BEFORE they are allowed to maintain and
use this silencer.
This manual should be readily available to all operators responsible for operation
and maintenance of the silencers.
We thank you for selecting products from Solberg Manufacturing, Inc. We are
confident that our superior filter and silencer designs will meet your application
requirements.
Section B
GENERAL INFORMATION
1. Identification of Solberg Side Channel Blower Silencers.
All Solberg side channel blower silencers should have an identification
label/nameplate that gives the following information:
Assembly Model #
(The exception is OEM supplied units. In this case, please enter the OEM part
numbers below.)
Fill in the actual nameplate data from your new Solberg product(s):