SIG SAUER SIG556 Grip-Light Operating - Manual (Page 4)

Instruction Manual STL100
Features:
- 3 Watt high intensity LED (center).
- 3 LED map light (outer ring).
- 3 position switch (high intensity, map and “ Off ”)
- All aluminum machined housing, waterproof
- Includes carry pouch & batteries
Thank you for purchasing Sigarms “SIGTac Tactical Flashlight”. Please read the
instructions carefully before use.
Operation:
The flashlight is operated by two CR123A lithium batteries
1. Installing the batteries: Unscrew the End Cap (3); insert the batteries (+) end
towards the Flash Head (1); screw on the End Cap (3) clockwise until snug.
2. By rotating the Flash Head (1) you get three switch positions
- Center (7) “Off “
- Right (When the single dot (8) is aligned) “On” high intensity light
- Left (When the three dots (6) is aligned) “On” map light
3. Momentary mode of operation: unscrew the End Cap (3) counter clockwise ½
to 1 full turn. Depress Momentary Button (4) to operate light.
General:
1. For continuous smooth operation keep the threads clean and lubricate with
silicon lubricant.
2. When returning the flashlight to the carry pouch, make sure the Flash Head
(1) is set at “Off” (center position).
Caution:
- Avoid pointing the flashlight at eyes.
- Avoid touching the flashlight head when flashlight is on (hot).
- Avoid using new and old batteries together.
Flashlight operation questions? Contact Customer Service at (603) 772-2302.
OM-GRIPLIGHT 3/2007 SIGARMS Inc. 18 Industrial Drive, Exeter, NH 03833 www.sigarms.com