Shellab SRI21FV-2 - Manual (Page 3)

3
RECEIVING AND INSPECTION
Your satisfaction and safety require a complete understanding of this unit. Read
the instructions thoroughly and be sure all operators are given adequate training
before attempting to put the unit in service. NOTE: This equipment must be used
only for its intended application; any alterations or modifications will void your
warranty.
1.1 Inspection: The carrier, when accepting shipment, also accepts responsibility for
safe delivery and is liable for loss or damage. On delivery, inspect for visible
exterior damage, note and describe on the freight bill any damage found and
enter your claim on the form supplied by the carrier.
1.2
Inspect for concealed loss or damage on the unit itself, both interior and exterior.
If necessary, the carrier will arrange for official inspection to substantiate your
claim.
1.3
Return Shipment: Save the shipping crate until you are sure all is well. If for
any reason you must return the unit, first contact your Customer Service
representative for authorization. Supply data plate information including model
number and serial number. For information on where to contact Customer
Service, please see the manual cover.
1.4
Accessories: Verify that all of the equipment indicated on the packing slip is
included with the unit. Carefully inspect all packaging before discarding. The
incubator is supplied with eight (8) shelves.
Section
1