Sceptre X22HG-Naga - Manual (Page 5)

SCEPTRE X22 Page5
Tips and Safety Precautions
THIS PRODUCT HAS BEEN TESTED FOR COMPLIANCE WITH
REGULATORY SAFETY CERTIFICATIONS
This product is designed and manufactured to operate within defined design
limits, and misuse may result in electric shock or fire. To prevent the product
from being damaged, the following rules should be observed for the
installation, use and maintenance of the product. Read the following safety
instructions before operating the display. Keep these instructions in a safe
place for future reference.
•
To avoid the risk of electric shock
or component damage, switch off
the power before connecting other
components to the X22 LCD
MONITOR.
•
Unplug the power cord before
cleaning the X22 LCD MONITOR.
Do not use a liquid or a spray
cleaner for cleaning the product.
Do not use abrasive cleaners.
•
Always use the accessories
recommended by the manufacturer
to insure compatibility.
•
When moving the X22 LCD
MONITOR from an area of low
temperature to an area of high
temperature, condensation may
form on the housing. Do not turn on
the X22 LCD MONITOR
immediately after this to avoid
causing fire, electric shock or
component damage.
•
Do not place the X22 LCD
MONITOR on an unstable cart,
stand, or table. If the X22 LCD
MONITOR falls, it can injure a
person and cause serious damage
to the appliance. Use only a cart or
stand recommended by the
manufacturer or sold with the X22
LCD MONITOR.
•
Any heat source should maintain a
distance of at least 5 feet away
from the X22 LCD MONITOR, i.e.
radiator, heater, oven, amplifier etc.
Do not install the product too close
to anything that produces smoke or
moisture. Operating the product
close to smoke or moisture may
cause fire or electric shock.
•
Slots and openings in the back and
bottom of the bezel are provided
for ventilation. To ensure reliable
operation of the X22 LCD
MONITOR and to protect it from
overheating, be sure these
openings are not blocked or
covered. Do not place the X22 LCD
MONITOR in a bookcase or
cabinet unless proper ventilation is
provided.
•
It is not recommended to use the
X22 LCD MONITOR in a portrait
format (by rotating 90 degrees)
under high temperature
environment (25°C or higher),
since this would retard heat
dissipation and would eventually
damage the monitor.
•
Never push any object into the
ventilation slots of the X22 LCD
MONITOR. Do not place any
objects on the top of the Product. It
could short circuit parts causing a
fire or electric shock. Never spill
liquids on the X22 LCD MONITOR.
•
The X22 LCD MONITOR should be
operated only from the type of
power source indicated on the
label. If you are not sure of the type
of power supplied to your home,
consult your dealer or local power
company.
•
The power cable must be replaced
when using different voltage from
that specified in the User Manual.