Sceptre X22HG-Naga - Manual (Page 33)

SCEPTRE X22 Page33
MISCELLANEOUS
This function adjusts many loose options inside the monitor.
1. Press MENU to open the OSD then highlight MISCELLANEOUS by
pressing with the
(▲/+) or (▼/–) buttons.
2. Press MENU to enter the function.
3. Press with the (▲/+) or (▼/–) buttons to select the option you want
to adjust and press MENU to adjust the function.
4. Press the
(▲/+) or (▼/–) buttons to adjust the value of the option.
i. SHARPNESS – This option adjusts the sharpness of
the graphics and text.
ii. INPUT SELECT – This option lets you select the
input you want.
iii. OVER DRIVE – This option helps increase pixel
response time reducing ghosting effects.
iv. DCR – This option turns dynamic contrast on or off.
v. DISPLAY INFORMATION – This option shows the
monitor’s information such as resolution and refresh
rate.
Please Note :
•
You can switch sources easily by using the SOUCE
button on the side of the monitor.
EXIT
This function exits the OSD menu.
1. Select the EXIT function with the
(▲/+) or (▼/–) buttons and
press MENU to exit.