Sceptre X32BV-NAGA User Manual
Page 35
SCEPTRE X32 HDTV User Manual
- 35 -
www.SCEPTRE.com
3. Press
the
↵ button to go into TUNER MODE function.
4. Press
the
▲ or ▼ buttons to select the options AIR or CABLE.
5.
If you have an antenna connected to the X32 LCD HDTV, please select AIR
as your option by pressing the
↵ button.
6.
If you have cable connected to your X32 LCD HDTV, please select CABLE as
your option by pressing the
↵ button. An additional option will pop up.
Please use the ▲ or ▼ buttons to select AUTO as your cable option and
press
↵ to confirm the selection.
7.
Once you have made the selection, the OSD will return you back to
CHANNEL main options. Press the ▼ button to highlight the AUTO SCAN
function and press
↵ twice to start scanning for channels.
8.
Once the scanning is done, you can watch the TV.
Please Note :
•
Not all broadcasts are in High Definition (HD). Please refer to your
local broadcasting stations for more information.
•
The X32 LCD HDTV’s tuner is designed for HDTV therefore
requires a stronger signal than normal TVs. If you cannot achieve
that signal level with your antenna or cable, your X32 LCD HDTV
might lose picture or sound.