If you want the better connection with component – Sceptre X32BV-NAGA User Manual
Page 29
SCEPTRE X32 HDTV User Manual
- 29 -
www.SCEPTRE.com
If You Want the Better Connection with Component…
1.
Make sure the power of X32 LCD HDTV and your set-top box is turned off.
2.
Obtain a Component Cable. Connect the green color connector to both your
set-top box and YPbPr’s green connector port on the back of your X32 LCD
HDTV.
3.
Connect the blue color connector to both your set-top box and YPbPr’s blue
connector port on the back of your X32 LCD HDTV.
4.
Connect the red color connector to both your set-top box and YPbPr’s red
connector port on the back of your X32 LCD HDTV.
5.
Obtain a RCA Audio Cable. Connect the white color connector to both your
set-top box and YPbPr’s white connector port on the back of your X32 LCD
HDTV.
6.
Connect the red color connector to both your set-top box and YPbPr’s red
connector port on the back of your X32 LCD HDTV.
7.
Turn on the X32 LCD HDTV and your set-top box.
8.
Use the remote control’s source button or the source button on the right side
of the TV to switch to YPbPr.
Please Note :
•
Please reference the set-top box’s manual as well, to make sure
the set-top box is configured to output correctly to the TV.
•
Sceptre’s X32 LCD HDTV supports SONY’s universal remote
code. Please look up SONY’s codes in your universal remote’s
hand book.