ScanTool STN11xx - Manual (Page 13)

STN11xx PowerSave
SLXST ms SLXWT ms
Specifies how long the SLEEP input must be held in
the active (“sleep”) state to put the device to sleep. The
ms
parameter is the minimum time in milliseconds. The
default is 3000 (3 seconds).
Specifies how long the SLEEP input must be held in
the inactive (“wake”) state to wake the device from
sleep. The ms parameter is the minimum time in
milliseconds. The default is 2000 (2 seconds).
STN11XXPSB www.ScanTool.net 13 of 13