ScanTool LX OBDLink - Manual

OBDLink LX Bluetooth
Android Quick Start Guide
Scan the QR code or visit the URL from your Android
device to download the OBDLink app:
The DLC is usually found on the driver’s side, under
the dash.
—Can't find your DLC? Visit dlc-locator.com
—LEDs are off? Check vehicle for blown fuses.
2
3
Open 'Settings' app, and
tap 'Wireless & networks' 4 1
Download & install OBDLink app
Plug OBDLink LX into the diagnostic link
connector (DLC)
Turn ignition on
Make sure 'Bluetooth' is enabled, then
tap 'Bluetooth settings'. 5
The 'BT' LED will switch to a fast blink.
Press the 'Connect' button on OBDLink LX.
6
You must complete steps 7, 8, and 9
within 2 minutes. If you need more
time, press the button again.
7
Tap 'Scan for devices', and wait for
OBDLink LX to appear on the device list. 7
‘Power' LED will turn ON, and the 'BT' LED will start
flashing slowly.
OBD H OST P OWER BT
7
Tap 'OBDLink LX - Pair with this device'
8
Attention!
[instructions continue on reverse] obdlink.com/app
OBD H OST P OWER BT
'Connect'
button