Pop up drain installation (2) – Santec 9520KT User Manual
Page 8

0 8
9520KL,KR, KT _ _
eye-screw of the drain plug is facing back so that the ball rod will
Insert ball rod washer into drain body followed by the ball rod, 2nd
washer and ball rod nut. Tighten the ball rod nut until snug.
Gently push the horizontal ball rod down to place the plunger in the
up position.
Insert the lift knob into the back of the spout and (from underneath)
screw the lift rod onto the lift knob securely.
Connect the lift rod with the ball rod using the pop-up connection and
tighten securely with screwdriver.
Test pop-up for smooth operation and adjust if necessar y.
P o p U p D r a i n
Drain plug with
adjustable eye-screw
Drain tube
Ball rod
assembly
(ball rod, ball rod
nut, & 2 washers)
Lift rod
Lift knob
Pop Up Drain Installation (2)
Pop-up connection