Handle trim installation (1) – Santec 9520KT User Manual
Page 5

9520KL,KR, KT _ _
0 5
H a n d l e Tr i m
Remove the valve body mounting hardware from the valve body. Slip
through the appropriate hole next to the spout (HOT-left & COLD-right).
hoses toward tee connector.
For proper handle turning direction, install the handle with the “cold”
blue label at the right side of sink (looking from front) and the handle
with the “hot” red label at the left side of the sink.
Handle trim is ready for drop-in installation.
DO NOT DISSASSEMBLE HANDLE TRIM.
Handle Trim Installation (1)
Valve Body
Mounting Hardware
Washer
Brass Lock Nut
Tee connecting hoses