Cabletron Systems MRXI 10BASE-T - Manual (Page 28)

USING COMMUNITY NAMES
Page 5-1
CHAPTER 5
USING COMMUNITY NAMES
This chapter defines the fields found on the Community Names screen
and describes entering and using the community names table. To
access the Community Names Screen:
1. Use the arrow keys to highlight COMMUNITY NAMES at the
bottom of the Device/Port Information Screen.
2. Press Return to display the Community Names Screen.
The Community Names Screen (see Figure 5-1) is an interactive table
that lets you designate community names for SNMP compliant
network management workstations, such as a PC running Remote
LANVIEW/Windows, that can access the MRXI and receive alarms
from the MRXI. The SAVE command saves the currently defined
Community Names Table. Table entries take effect following a SAVE.
The RETURN command displays the Device/Port Information Screen.
Figure 5-1. Community Names Screen
COMMUNITY NAMES
Community Name
public
ctron
Traps
NO
NO
NO
NO
NO
NO
NO
NO
IP Address
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
SAVE RETURN
Access
RO
RW
SU
NA
NA
NA
NA
NA
Please note: SU names are local passwords.