Cabletron Systems MRXI 10BASE-T - Manual (Page 24)

USING THE DEVICE/PORT INFORMATION SCREEN
Page 4-1
CHAPTER 4
USING THE DEVICE/PORT
INFORMATION SCREEN
This chapter describes local management commands, field entries and
statistical information presented on the MRXI/LM Device/Port
Information screen.
The Device/Port Information screen, shown in Figure 4-1, summarizes
HUB status and operational information related to the available
Ethernet ports. The command menu at the bottom of the display lets
you SAVE the current user defined fields, ENABLE and DISABLE
Ports, RESET COUNTERS, EXIT from the local management session
and provides access to the Community Names screen.
Figure 4-1. DEVICE/PORT Information Screen
The Device/Port Information screen presents information related to
HUB and the port (1 through 14) currently selected by PORT
n
command as follows:
Device/Port Information
Device Name:
SAVE RESET COUNTERS EXIT
Device Port 2
1619586
0
0
MRXI Ethernet Address:
Set IP Address:
00-00-1d-00-05-48
34.141.3.14
Packets:
Receive Collisions:
Transmit Collisions:
628104
0
0
Device Ports On:
Device Ports Off:
Port Media Type:
Port Administrative Status:
Port Segmentation Status:
Port Link Status:
12
2
10BASE-T
On
On
NLNK
PORT 2
ENABLE PORT DISABLE PORT DISABLE ALL PORTS ENABLE ALL PORTS
COMMUNITY NAMES
Set Modem Baud Rate: 9600