Cabletron Systems MRXI 10BASE-T - Manual (Page 22)

GETTING STARTED
Page 3-7
3. Turn modem on. The modem must be set for Auto Answer and DCD
(Data Carrier Detect) active. Refer to the modem manual for
procedures.
4. Call the modem. The Password Screen is displayed when the
connection is established.
5. Enter the Password. Any Superuser password (assigned at the
Community Names Screen) is valid.
6. Press Return. The MRXI SNMP LOCAL MANAGEMENT screen is
displayed (Figure 3-3).
7. Press Return. The Device/Port Information screen is
displayed(Figure 3-4).
MRXI/LM is now ready for operation.