Vehicle care 9-37 – Cadillac 2010 SRX Crossover User Manual

Page 341

Vehicle Care

9-37

2. Unlatch three clips and lift up the

underhood electrical center
cover to remove.

Passenger Side

The removal of the air filter/cleaner
assembly and base is required for
the replacement of one of these
bulbs:

1. Open the hood. See Hood on

A. Air Duct Clamp

B. Connector Lock

C. Sensor Connectors

D. Retaining Clips

2. Disconnect the outlet duct by

loosening the air duct clamp (A).

3. Remove the connector lock (B)

located at the bottom of the
sensor connector (C).

4. Press on the top and bottom of

the sensor connectors (C) and
remove.

5. Lift the three retaining clips (D)

on the air filter housing.

6. Turn and tilt cover slightly

upwards and slide cover away
from outside edge of vehicle.
Lift the cover away from base.

7. Lift the air cleaner/filter base to

disengage from three pins.