Cadillac 2010 SRX Crossover - Manual (Page 99)

Storage 3-3
Additional Storage
Features
Cargo Cover
For vehicles with the dual position
cargo cover, it can be used to cover
items in the cargo area of the
vehicle.
Install the cargo cover
1. Hold the cartridge so that the
pull‐out shade faces the rear of
the vehicle.
2. Align the cartridge over the pins
on the trim panels of the vehicle.
3. Push down on the cartridge to
snap it into place.
4. Unroll the shade towards the
rear of the vehicle.
5. The shade can be set in two
positions. It can be set in a
half way open (A) position for
loading objects into the rear
compartment.
6. Pull cargo cover down to
lower (B) position to conceal
objects in the rear compartment.
7. Align the pins with the channels
on both sides.