Maintenance, Cleaning the filters, Replacing the hepa filter – Reliable EV1 User Manual
Page 25
23
MAINTENANCE
Disconnect the machine from the power
supply before any maintenance.
The machine is built with extremely reliable
technology and components; therefore it
does not require any special maintenance.
Careful use and strict compliance with these
instructions are the best way to achieve the
desired results and maximum performance.
This job must be performed after the
machine has cooled down completely.
We recommend eliminating any scale
deposits from the boiler at least twice a year
as follows:
t %JTDPOOFDUUIFNBDIJOFGSPNUIF
power supply.
t 1MBDFBDPOUBJOFSVOEFSUIFNBDIJOF
then remove plug X by turning it counter-
clockwise using round nose pliers or the
key provided (fig. 23).
t %SBJOUIFCPJMFSJOUPUIFDPOUBJOFS UIFO
refit plug X with the relevant washer R.
CLEANING THE FILTERS
Check that the Hepa filter, the activated
carbon filter and the filter of the motor
air inlet are clean. If necessary, replace
these filters using original spare parts. It is
recommended that these filters be
replaced yearly.
REPLACING THE HEPA FILTER
t %JTDPOOFDUUIFNBDIJOFGSPNUIF
power supply.
t 0QFOUIFHSJMMPOUIFSJHIUTJEFCZQVTIJOH
the relevant fixing.
t 3FQMBDFmMUFS4BOESFmUUIFHSJMMF
fig. 24
S
fig. 25
T
fig. 23
R
X
MAINTENANCE
CAUTION
ATTENTION
IMPORTANT