Reliable EV1 - Manual (Page 15)

13
FILLING THE MACHINE FOR STEAM
Disconnect the machine from the
power supply.
Remove the tank cap 6 and fill with tap water
up to the recommended level. Refit the cap.
For this operation it is advisable to use the
drip catch bottle supplied.
Your steam cleaner has been designefor use
with normal tap water. In order to extend
the life of this product, if the degree of
water hardness is very high in your area,
we recommend using 50% tap water with
50% distilled water. Do not use other liquid
(chemical, fragances, etc...).
fig. 5
fig. 6 REAR VIEW OF THE MACHINE
6
Assembling the extension wands (fig. 5)
t .PWFUIFDPOOFDUJPOCVUUPOUPUIF
central position 0.
t *OTFSUUIFFYUFOTJPOXBOE
t 5VSOUIFCVUUPOUPUIFSJHIUUPCMPDLUIF
wand in position (position 1 of Fig. 5).
Removing the extension wands
t 5VSOUIFMPDLJOHCVUUPOUPUIFDFOUSBM
position and pull off the wands.
ASSEMBLING THE ACCESSORIES
Choose the accessory that best suits your
cleaning needs and insert it either in the
handle or in the extension wands following the
procedure described above.
USE OF THE MACHINE
CAUTION
ATTENTION
IMPORTANT