Ram Trucks 2015 Chassis Cab Commercial - Diesel Supplement - Manual (Page 55)

Oil Life Reset
Your vehicle is equipped with an engine oil change
indicator system. The “Oil Change Required” message
will display in the EVIC display for approximately
10 seconds after a single chime has sounded, to indicate
the next scheduled oil change interval. The engine oil
change indicator system is duty cycle based, which
means the engine oil change interval may fluctuate,
dependent upon your personal driving style.
NOTE:
Use the steering wheel EVIC controls for the
following procedure(s)
Vehicles Equipped With Passive Entry
1. Without pressing the brake pedal, press the ENGINE
START/STOP button and place the ignition to the
ON/RUN position (do not start the engine).
2. Press and release the DOWN arrow button to scroll
downward through the main menu to “Vehicle Info.”
3. Press and release the RIGHT arrow button to access
the ”Oil Life” screen.
4. Press and release the DOWN arrow button to select
“Reset,” then press and release the Right arrow button
to select reset of the Oil Life to 100%.
5. Press and release the Up arrow button to exit the EVIC
screen.
Vehicles Not Equipped With Passive Entry
1. Without pressing the brake pedal, press the ENGINE
START/STOP button and place the ignition to the
ON/RUN position (do not start the engine).
2. Press and release the LEFT arrow then press and
release the DOWN arrow button to scroll downward
through the main menu to “Vehicle Info.”
3
UNDERSTANDING YOUR INSTRUMENT PANEL 53