Uconnect® 5.0, Clock setting, Uconnect – Ram Trucks 2014 ProMaster Commercial - User Guide User Manual

Page 34: Electronics

Uconnect® 5.0

Clock Setting

1. To start the clock setting procedure, press the SETTINGS hard-key on the right

side of the display, then “Clock & Date” soft-key, and then “Set Time & Format”
soft-key. Select the up or down arrows as appropriate.

2. Touch the “Up or Down arrows” to adjust the hours or minutes, next select the AM

or PM soft-key. You can also select 12hr or 24hr format by touching the desired
soft-key.

3. Once the time is set press the “Done” or “back arrow” soft-key to exit the time

screen.

NOTE:
Once the time has been set on the radio, the time will also appear in the Electronic
Vehicle Information Center (EVIC).

Uconnect® 5.0

ELECTRONICS