Ram Trucks 2009 Diesel - Quick Reference Guide - Manual (Page 11)

turn signals/wiPer/washer/high beaMs leVer
TURN SiGNALS/LANE CHANGE ASSiST
• Tap the lever up or down once and the turn signal (right or left)
will flash three times then automatically turn off.
WiPERS
intermittent, Low and High Operation
• Rotate the end of the lever to the first detent position for one of five
intermittent settings, the second detent for low wiper operation and
the third detent for high wiper operation.
Washer
• Push in on the end of the lever and hold for as long as spray is desired.
HiGH BEAMS
• Pull the lever toward you to activate the High Beams.
• A High Beam symbol will illuminate in the cluster to indicate the
High Beam lights are on.
electronic range select (ers)
(raM trucK w/ autoMatic transMission only)
• ERS allows you to limit the highest available gear when the shift lever
is in the DRiVE position.
• Toggle the switch on the column shift lever down (-) or up (+) to select
the desired top gear.
• To disable ERS, press and hold the column shifter switch up (+) until
“D” is displayed in the odometer.
Wipers
Pull lever for
high beams
Push
Washer
175475_09a_RAM_3500_Diesel_QRG_111908.indd 12 11/19/08 8:50:35 AM