Ram Trucks 2009 Diesel - Quick Reference Guide - Manual (Page 10)

sPeeD control
CRUiSE ON/OFF
• Push the ON/OFF switch to activate the Speed Control.
• CRUISE will appear on the instrument cluster to indicate the
Speed Control is on.
• Push the ON/OFF switch a second time to turn the system off.
SET
• With Speed Control on, at a speed greater than 35 mph (56 km/h),
Push and release the Set switch.
ACCEL/DECEL
• Push and hold the Resume/Accel switch to accelerate or push and
hold the Decel switch to decelerate the vehicle; release the switch to
save the new set speed.
• Once a speed is set, pushing the Resume/Accel switch once or Decel
switch once will increase or decrease the set speed approximately
1 mph (2 km/h).
CANCEL
• Push the Cancel switch, or apply the brakes to cancel the set speed
and maintain the set speed memory.
• Push the ON/OFF switch to turn the system off and erase the set
speed memory.
RESUME
• To resume a previously selected set speed in memory, push the
Resume/Accel switch and release.
Push
on/off
Push
set
Push
resume/accel
Push
Cancel
Push
Decel
Push
Washer
175475_09a_RAM_3500_Diesel_QRG_111908.indd 11 11/19/08 8:50:31 AM