PYRAMIDA KH 60 Rustico v.2 - Manual (Page 29)

29
After the fan has been in use for a long time don’t touch
the backlights – they are hot. While replacement of lamps it
is necessary to disconnect the device from electric network.
Don’t touch the fan surface with wet hands.
Regularly clean fat filters. Don’t remove fat filters while the
fan is running.
If non-standard situation of failure arises disconnect the
device from the network and call the service center, its address
is in the warranty certificate. If you have decided that the
device is non-serviceable, make it unsuitable for exploitation:
disconnect it from the electric network, cut power cable,
remove potentially dangerous parts (it is especially important
for the safety of children who can play with unused or thrown
out devices).
After product life cycle expiry the device is liable to
particular utilization. Do not throw the device out
together with ungraded domestic waste.
If present maintenance is disregarded, manufacturer is not
responsible for possible malfunctions.
IS STRICTLY PROHIBITED!
Do not print out an extract duct to the furnace flues and gas appliances intended for heating of water and space heating,
into air ducts, designed for other devices – it may cause the ventilation and cause harm to human health.
Do not check the draft of working hood using a torch or open flame – it may cause a fire.
 Do not light a gas stove without utensils (such as for heating). Using of open fire can be dangerous and damage the
plastic parts of the hood or cause a fire.
It’s forbidden to change the design of hoods and other interventions in the product of persons not authorized by the
manufacturer for warranty repair – this can lead to disruption of extraction and reduction of safety hoods to human health.