PS Engineering PMA8000BT - Manual (Page 11)

202-890-0702 Page 11 Jan. 2011 PMA8000BT Pilot Guide
a. Check your Smartphone, and be sure that it is paired with the
PMA8000BT as a “speaker” or “wireless speaker” in A2DP
mode.
Split Mode
The Split mode puts the pilot on COM 1, while
the copilot can use COM 2 independently. To
enter the split mode, press both the COM 1 and
COM 2 XMT buttons at the same time. To exit,
press the desired COM 1 or COM 2 XMT but-
ton.
When you activate the Split mode, the intercom
is inhibited to avoid confusion with multiple
conversations. To reactivate the intercom, press the Mute button.
Note: Split Mode does not turn off Nav, ADF, or Aux selected audio
to pilot. However, the copilot will only hear the selected com receiver
and unswitched inputs.
Telephone Operation
When the TEL button is active, the cellular telephone
is added to the intercom loop, and who is connected
to the phone depends on the intercom mode.
You can answer a call by pushing the TEL button
while it is ringing. Calls can be answered from the
telephone handset or the audio panel. You can disconnect from either
the handset or the audio panel. When a call is disconnected or
dropped, the TEL button indicator will extinguish after a few mo-
ments.
Some cellular telephones do not provide sidetone (where you hear
yourself speak). You can have the PMA8000BT provide sidetone by
holding both the TEL and ADF buttons at the same time, for more
than one second.
Telephone Pilot Copilot Passengers
ISO
ALL
CRW
On phone
Not connected