Minimum standard hand tools, Notice – Proheat M125 User Manual
Page 37
3-2
PROHEAT M-SERIES G-II PCM SERVICE MANUAL
Minimum Standard Hand Tools
•
Digital Multimeter
•
Ratchet – 3/8" drive
•
Extension, 12" – 3/8" drive
•
Socket, 13 mm – 3/8" drive
•
Screw Driver, Flat Blade 1/4" blade
•
Allen Key, 4 mm – 3/8" drive or extension T-handle
•
Allen Key, 5 mm – 3/8" drive or extension T-handle
•
Allen Key, 9/64"
•
2x Combination Wrench, 3/4"
•
Combination Wrench, 5/8"
•
Combination Wrench, 9/16”
•
Combination Wrench, 7/16”
•
Wire Brush
•
Adjustable Wrench
•
Vise Grip
•
Torque Wrench 25 – 150 in. lbs. [2.8 – 17 Nm]
NOTICE
Additional standard hand tools may
be required. This list is not intended
to be exhaustive.