Accessory installation – Pro Boat PRB3600 User Manual

Page 10

background image

10

Lower the threaded stud into the

pre-drilled holes in the top of the hull.

Slide the tubing onto the stud from the

inside of the hull. Repeat this step for

all four torpedos.

Slide the front of the torpedos so they

are aligned with the hull. Once all the

torpedos are in position, replace the rear

cover and use a #1 Phillips screwdriver to

attach the cover.

Slide the rear mast into the tube at the

rear of the hull.

Slide the scale antenna into position on

the side of the driver's cabin.

Slide the spotlight into position in the

tube next to the driver's seat.

Accessory Installation