Pro Boat PRB07000 - Manual (Page 3)

3
EN
Ragazza
Recommended Tools and Materials
• Paper towel
• Clear tape (PRB0102)
• Pro Boat® Marine Grease and Gun (PRB0100)
• Medium or Thin CA (cyanoacrylate adhesive) or epoxy
adhesive
• 1.5mm and 2.5mm ball type hex wrenches
• 7mm nut driver
• Small flat blade screw driver
• Small Phillips screw driver
product Inspection
Carefully remove the boat and radio transmitter from the
box. Inspect the boat for damage. If you find damage
is present, please contact the hobby shop where you
purchased your boat.
Introduction
Pro Boat ® RC models look as good as they perform. Our boats, which include everything from scale sailboats to
fully licensed powerboats, exceed expectations and provide years of radio control fun and excitement. Whether your
passion leads you towards the pure serenity of sailing or the all-out speed of a Deep-V, Pro Boat models fit your taste,
budget and lifestyle. You can count on us to be available any time you need help—the brand is backed by Horizon
Hobby, one of the world’s largest distributors of hobby-grade RC products. The Pro Boat brand will help you turn your
boating passion into a reality, whether you’re new to the hobby or an old pro.
Please read this manual for operation and maintenance instructions.
Register your boat online at www.proboatmodels.com.
Contents Specifications
length 39 in (1.0 m)
front Beam (width) 14 in (360mm)
Back Beam (width) 14 in (355mm)
Mast Height 61 in (1.55 m)
Total Height 90 in (2.3 m)
Transmitter Spektrum ™ 2.4GHz 2-stick
Transmitter (DX2M)
Batteries 4 AA batteries (included) to
operate the transmitter.
4 AA batteries (included) to
operate the receiver.
Receiver Spektrum MR200
Hull Material Fiberglass
Sail Material
Rip-stop nylon
Sail Area (Main) 279 in 2 (0.18 m 2 )
Sail Area (Jib) 372 in 2 (0.24 m 2 )
Sail Area (Overall) 651 in 2 (0.42 m 2 )