phil&teds alpha - Manual (Page 21)

Instructions
INSTALLATION IN THE VEHICLE
WITHOUT BASE
6a Place the child restraint rear-facing on the vehicle seat and
make sure the handle is in specified position. The child will
face the rear of the vehicle.
6b Route the vehicle lap belt through both lap belt guides and
buckle the seat belt.
6c Route the vehicle shoulder belt around the back of the
child restraint and through the shoulder belt guide.
6d If vehicle shoulder belt is too short, please move vehicle
seat as far back as possible and lower the vehicle seat belt
height adjustment to the lowest possible height. If the vehicle
belt is still too short, try another authorised seating position.
6a
6b
6c
6d