phil&teds e3 buggy - Manual (Page 6)

two: swivel ` swerve
1.
Lift footwell as far as hinge will allow.
2.
Remove front
wheel from bag
(the rod is greased
so watch out for
greasy fingers!).
4.
Release cap. Your wheel will be in
place for use.
to lock the front wheel
1.
Align silver button with small hole on
inside of front wheel black cap.
2.
Turn wheel towards rear wheels
of buggy so front wheel is directly
underneath footwell and parallel with
rear wheels.
3.
Cap will then fully close and fix front
wheel. Reverse for swivel.
`
3. Extend black
cap out fully
on underside
of footwell and
insert rod on
front wheel.
cap open cap closed
5 4
swivel fixed