Philips AZ1208-17 - Manual (Page 6)

You can select a nuniber of tracks and store these in the memofy
in the desired sequerrce. You can store any track more than once.
A maximum of 20 tracks can be stored in the memory.
1 Select the desired track with SEARCH kw or w».
2 As soon as the number of the desired track is displayed, press
the PROGRAM button to store the track in the memory.
— PROWMi appears in the display and the number of the
stored track is shown. Then pro^ lights up briefly.
3 Select and store all desired tracks in this way.
.ili//
1 (-
52^
À.
You can review your settings by pressing the PROGRAM button
for more than 2 seconds.
“* The display shows all stored track numbers in sequence.
if you try to store more than 20 tracks, the display shows FUL L
If you press PROGRAM and there is no track selected, the display
shows f»o 5 6 L .
If you have selected the tracks while playback is stopped, press
PLAY-PAUSE >11.
If you have selected the tracks during CD play, first press STOP □,
then press PLAY-PAUSE Will.
From the stop position, press STOP □.
— n o p r o g lights up briefly, piuigiiam disappears, and your
program is erased.
Note: The program will also he erased if you:
- interrupt the power supply.
~ open the CD compartment or
- move the POWER control to TUNER or TAPE.
14
1 Set the POWER control to TAPE
2 Press STOP-OPEN OA to open the cassette compartment.
A
3 Insert a recorded cassette with the open side upwards and close
the cassette compartment.
.J
4 Press PLAY < to start playback.
5 P r e s s o r to rewind or fast forward the tape.
6 To stop the tape press STOP-OPEN 04.
Afore: The keys are released at the enrf of the tape.
Recording is permissible insofar as copyright or other rights of
third parties are not infringed upon.
For recording on this set you should use a cassette of the type
NORMAL (lEC type I|. This deck is not suitable for recording on
cassettes of the type CHROME {lEC type II) or METAL {lEC
type IV}.
The recording level is set automatically. The contrals VOLUME and
OBB do not affect the recording.
At the very beginning and end of the tape, no recording will take
place in the ? seconds during \^ich the leader tape passes the
recorder heads.
Pfotacting tapes from accidental arasure l ^
Keep the cassette side to be protected in front of you and snap off
the left tab. Now. recording on this side is no longer possible.
To record again on this side of the cassette, cover the opening with
a piece of adhesive tape. !
15