Connecting antennas, Connections – Philips HIFI RECEIVER User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connections
IMPORTANT!
- Before connecting the AC power cord to the
wall outlet, ensure that all other connections have
been made.
- Never make or change any connections with
the power switched on.
- The type plate is located at the rear or bottom
of the system.
FM Indoor Antenna
Connect the supplied FM
antenna to the FM jack. Move
the antenna in various directions
until the clearest signal is
received.
X
Note:
Connecting antennas
- Keep the antenna as far away as possible from the TV, VCR
or any radiation source to prevent unwanted noise.
AM Indoor Loop Antenna
Connect the supplied AM loop antenna to the AM
jack. Position the loop antenna to receive the dearest
sound.
FM Outdoor Antenna
For better FM reception, use a 75 ohm coaxial cable (not
supplied) to connect the system to an outdoor FM antenna
as shown.
C
onnections