Scanning, P. 33 – Canon N650U User Manual
Page 33
33
S T E P 2
Scanning
Once you have set the magnification and scan mode, you may proceed with the
scan. Once the scan is complete, Plug-in Module CS-U automatically closes and
returns to the application software, such as CanoScan Toolbox CS or ArcSoft
PhotoStudio 2000, if the [Close Plug-in After Scan] setting is on. The following
provides an example of scanning from within ArcSoft PhotoStudio 2000.
To Initiate the Scan
Specify the Scan Area.
.
Click on the [Scan] button.
• The scan will start.
• If a check mark is present in the [Close Plug-in After Scan] option in the
[Preferences] menu, Plug-in Module CS-U will automatically quit when
the scan finishes.
Hint
• The scan button cannot be clicked if the scan area is set too small (less
than 64x64 pixels) or not specified.
• The scan cannot be performed if the required memory is larger than the
free memory.
➟