Cabletron Systems 9F310-02 - Manual (Page 15)

2-3
The Reset Switch
The Reset Switch
The Reset switch is located on the rightmost front panel, under the top plastic tab
as shown in Figure 2-2. It serves two functions:
• Pressing the reset switch twice within three seconds causes the processor (i960)
to reset.
• Pressing and holding the switch on for three or more seconds causes the
module to shutdown. Pressing and holding again for three seconds restarts the
module.
SNMP management may be used to disable this switch to enhance module
security.
Figure 2-2. The Reset Switch
SMB CPU
Reset Switch