Clarion DXZ858RMP - Manual (Page 48)

English
48
DXZ858RMP
280-8188-00
Digital Radio / DAB Operations
Recalling a preset
programme
1. Press the [SRC] button to select the DAB
mode.
2. Touch [BAND].
Each touch of [BAND] changes the display
in the following order:
M1 ➜ M2 ➜ M3 ➜ M1...
3. Touch on the right of the display to
recall a preset programme.
AF function
The AF function switches to a different
frequency on the same network in order to
maintain optimum reception.
• The factory default setting is “ON”.
• If the reception of the current broadcast
station deteriorates, “SEARCH” appears in the
display and the radio searches for the same
programme on another frequency.
• For details on the “AF function”(cf. page 19) ,
refer to the section “RDS operation” of the
respective owner's manual.
● To switch the AF function ON
● To switch the AF function OFF
● AF function between RDS and DAB
When the same programme is broadcast by
both RDS and DAB, and this function is ON, the
main unit automatically switches to receive the
broadcast with the better reception.
TA (Traffic Announcement)
When a traffic announcement broadcast starts
in the TA standby mode, the traffic
announcement broadcast is received as top
priority regardless of the function mode. Traffic
programme (TP) automatic tuning is also
possible.
• This function can only be used when “TP” is lit
in the display. When “TP” is lit, this means that
the DAB or RDS broadcast station being
received has traffic announcement
programmes.
• For details on “TA” (cf. page 20), refer to the
section “RDS operation” of the respective
owner's manual.
● To set the TA standby mode
● To cancel the TA standby mode
● To search for a TP station
Notes:
• If a TP station is not received, the main unit stops
the search operation.
• “TP” may be lit in the display when a TP
broadcast is transmitted from an RDS station. In
this case, press the [TA] button to perform TP
seek tuning. Press the [TA] button again to return
to the previous mode.
INFO (Announcement)
In the INFO standby mode, when the selected
announcement programme starts, the main unit
automatically switches to the selected
announcement programme.
● To set the INFO standby mode
If you press and hold the [TA] button for 1
second or longer, “INFO” lights in the display
and the main unit is set to the INFO standby
mode until the selected announcement is
broadcast.
When the selected announcement broadcast
starts, the announcement item appears in the
display. If you press and hold the [TA] button for
1 second or longer while the selected
announcement broadcast is being received,
reception of the selected announcement
broadcast is cancelled and the main unit enters
the INFO standby mode.
● To cancel the INFO standby mode
To cancel the INFO standby mode, press and
hold the [TA] button for 1 second or longer.
● Information select
This is a function for selecting INFORMATION
ON or OFF in the Information interrupt mode.
You can set ON for up to 6 information items.
You can select any of the 6 items below:
INFORMATION item
ENGLISH Contents
Travel Transport flash
Warning Warning / Service
News News flash
Weather Area weather flash
Event Event announcement
Special Special event