Adjustment via on-screen-display – Philips MB7000 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adjustment via On-Screen-Display
One example
Use following steps to adjust horizontal (position) of the display:
• Press O, you will see an OSD window (main menu) presented on
the screen.
resolution and frequency of the display
layer of the OSD menu
i
StZE & POSITION
GEOMETRY
SPECIAL
COLOR
TEMPERATURE
QUIT
SAVE AND EXIT
adjustment functions
Press |C> to place highlighted (BLUE) item.
GEOMETRY
SPECIAL
COLOR TEMPERATURE
QUIT
SAVE AND EXIT
Press +, a scale presented on the picture of OSD window.
HORIZONTAL SIZE
VERTICAL POSITION
VERTICAL SIZE
EXIT
IIIIIIMI-........................................ •■■■-29%
Press + or - to adjust the horizontal position of the display. The scale
in OSD window shows the controllable range.
HORIZONTAL SIZE
VERTICAL POSITION
VERTICAL SIZE
EXIT
IIIIIIIII................... ..................
the magnitude value of scale bar will be
decreased or increased according to the
adjustment
When the display has been adjusted to an appropriated position,
press lO scroll down to "EXIT" position and then press + once to
go back to first layer of OSD menu. Press 10 once to "SAVE AND
EXIT", press "+",then the adjusted parameters are automatically
saved.