How to set the tv for cable tv operation, Setting the tv for cable tv operation – Philips COLOR TV 25 INCH TABLE User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How
TO S
et
the
TV
for
C
able
TV
O
peration
o
T^OTE: If you went through
L T Setup (in your Quick Use
Guide), this task has already been
completed for you.
You need to make sure that the TV
is set to pick up either Cable TV
stations or Antenna signals. In
other words, the TV needs to
know whether you have connected
a Cable TV signal or a normal
antenna to its ANTENNA plug.
Press the MENU (M) button
on the remote, then press the
CHANNEL
A
or ▼ buttons to
select the word CABLE with the
TV’s on-screen arrow.
Press the (+) button (on the
TV or the remote) to select either:
YES- If you DO have Cable TV
connected to the TV.
Channels 1-125 can be
selected.
NO- If you have an Antenna
connected to the TV.
Channels 2-69 can be
selected.
<|> Press STATUS to clear the
screen.
Try it out. Press
g CHANNEL
AT
buttons
and scan the channels.
Remember, the TV has been set at
the factory to select certain chan
nel numbers. See the following
page on how to set the TV to
select the channels in your area.