Philips COLOR TV 25 INCH TABLE - Manual (Page 10)

□I
S etting the A lternate C hannel and S urf C ontrol
A ’’list" or series of previously
viewed channels can be selected
with the SURF button on your remote
control. With this feature you can
easily switch between different TV
programs that currently interest you.
The SurfControl allows you to set up
to 8 channels in its quick viewing
‘•list’’.
LBEGINJ
Press the MENU (M) button on
the remote, then press the CHAN­
NEL A or ▼ buttons to select the
word SURF with the TV’s on-screen
arrow.
Press the (+) button to select either
ALT. CHN. (Alternate Channel) or
SURF. See explanation of Surf
options with the illustration on this
page.
Press STATUS button to clear the
screen.
wiail
rsmr........ t
ALT. CHN.
(Alternate Channel) -
Current and one previ­
ous channel.
SURF • Current and
up to seven additional
channels available.
Note: the Channel
Surf can be used with
fewer than eight chan­
nels. In this way the
numbo- of Surf chan­
nels can match or fit
your present viewing
interests.
To Use
Alternate Channel:
With the ALT.CHN.
control ON, select
the two desired
channels for view­
ing with the number
buttons on the
remote control.
Press the SURF
button on the
remote to “toggle”
between the two
selected channels.
When using SURF:
Remember, you can
add as many as
eight channels in
the Smart Surf
Memory.
How To Use SURF
I tBEGINJ
With the SURF control ON (see
above), select a desired channel for
viewing. You can use the number
buttons on the remote (or the
Channel
A or T buttons).
Press the SURF button on the
remote while the channel display is
still present on the TV’s screen.
Press the SURF button on the
remote to quickly review current
action on channels contained within
the Surf list.
Repeat steps above to add up to eight
channels in the SURF channel mem­
ory ring.
Note: There are cwo methods to delete diannels from the 8-
channel SURF control ring:
* To remove ail channds from the SURF memory (with
the exception of channel 3 which will be left within the
SURF lik.) - Select the CABLE control in the On-screen
menu and press the (+), (-) buttons. Adjust the control
“YESyNO/YES” if you have Cable TV; or “NO/YES/NO" if
you are in the broadcast Antenna mode.
* lb remove all channels from the SURF memory (with
the exttption of the last viewed and currently selected
channels.) - From the SURF on-screen control option press
the (+} or (-) button to select the ALT.CHN. control in the
on-screen menu. Press the (+) or (-) button again to reselect
the SURF option.
10