Philips QG3260-41 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Storage
I Be sure Groomer is turned OFF. Remove cord
from outlet and Groomer before storing in a
safe, dry location where it will not be crushed,
banged, or subject to damage.
k Store the Groomer and attachments in the
pouch to prevent damage.
I Do not wrap cord around Groomer when
storing.
I Store cord in a safe location where it will not
be cut or damaged.
k Do not place or store Groomer where it can
fall or be pulled into a tub or sink, water or
other liquid.
Assistance
For assistance visit our website:
or call toll free: 1-800-243-3050
Information is available 24 hours a day,
7 days a week.
Battery Removal
I This Philips Norelco Groomer contains a
rechargeable Nickel Metal Hydride battery,
which must be disposed of properly (fig. 26).
I Battery may only be removed when
Groomer is to be discarded.
k For assistance, visit our website:
or
call toll free: 1-800-243-3050.
D
Unplug electrical cord from outlet and
Groomer before dismantling Groomer.
B Allow the Groomer to run until the
batteries are completely empty/depleted.
Turn Groomer off.
B Remove any comb and/or attachment from
Groomer.
Q Check if there are any screws in the back or
front of the appliance. If so, remove them.
H Remove the back and/or front panel of the
appliance with a screwdriver. If necessary,
also remove additional screws and/or parts
until you see the printed circuit board with
the rechargeable batteries.
Q If necessary, cut the wires to separate the
printed circuit board and the rechargeable
batteries from the appliance.
B
Do not attempt to replace battery. Insulate
battery ends by covering with tape and
or place battery in a small plastic bag.
Discard Groomer.
B
Contact your local town or city officials for
battery disposal information or call
drop-off locations.