Philips QC5530-15 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Assistance
For assistance, visit our website:
or
call toll free: 1-800-243-3050
Information is available 24 hours a day, 7 days a
week.
Storage
I Be sure Clipper is turned OFF. Remove cord
from outlet and Clipper before storing in a
safe, dry location where it will not be crushed,
banged, or subject to damage.
I Do not wrap cord around Clipper when
storing.
►
Store cord in a safe location where it will not
be cut or damaged.
►
Do not place or store Clipper where it can fall
or be pulled into a tub or sink, water or other
liquid while plugged in.
Battery Removal
> This Philips Norelco Clipper contains a
rechargeable Lithium-Ion battery which must
be disposed of properly (fig. 21).
k Battery may only be removed when
Clipper is to be discarded,
k For assistance, visit our website,
or
call toll free: 1-800-243-3050
D
Unplug electrical cord from outlet and
Clipper before dismantling Clipper.
B Allow Clipper to run until the battery is
empty/depleted.
B Turn Clipper OFF.
D Remove any comb attachment.
H Use a screwdriver to remove the upper
housing part of the Clipper (fig. 22).
□ Use a screwdriver to open the inner body
of the Clipper.
B
Use a screwdriver to remove the battery
from the Clipper (fig. 23).
□ Cut the wires with household scissors.
□ Do not attempt to replace battery. Insulate
battery ends by covering with tape and/or
place battery in a small plastic bag.
[E
Discard your Clipper. Do not attempt to
plug electrical cord into the outlet or
recharge the Clipper after the battery has
been removed.
m Contact your local town or city officials
for battery disposal information or call
for
battery drop-off locations.