Philips PS1944C - Manual (Page 4)

S et -U p and Q uick U se - A ntenna H ookups
A ntenna "
4> If your antenna has a round
cable (75 ohm) on the end, then
you're ready to connect it to the TV.
If your antenna has flat twin-lead
wire (300 ohm), you first need to
attach the antenna wires to the screws
on a 300 to 75 ohm adapter.
Push the round end of the
adapter (or antenna) onto the
ANTENNA/CABLE plug on the rear
of the TV. If the round end of the
antenna wire is threaded, screw it
down tight.
o
Si;i*AKATi; UHFA^HF
Oome of you may have two sep-
LJ arate antennas. One antenna
is for VHF channels (2-13) and
the other antenna is for UHF
channels (14-69).
For homes with separate
UHF/VHF antennas, you will
need an optional "combiner"
before you can connect to the TV.
See the "Smart Help " section (to
the right on this page) for order­
ing details.
( beqin )
Attach the separate UHF and
VHF antennas to the correct screws
on the combiner.
Push the round end of the com­
biner onto the ANTENNA/CABLE
plug on the rear of the TV.
CoMiuNATioN UHF/VHF
A combination antenna receives
normal broadcast channels
(VHF 2-13 and UHF 14-69). Your
connection is easy since there is
only one 75Q. (ohm) antenna plug
on the back of your TV - and
that’s where the antenna goes.
Combination VHF/UHF Antenna
(Outdoor or Indoor)
300 to 750
Adapter
(483521827003)
Back of TV
Twin Lead
Wire
Remember, g
be sure to set the
TV for the type sig­
nal you've connect­
ed (see page 7.)
To set the TV to
select only the chan­
nel numbers in your
area see how to
“Program" or "Add"
channels in memory
on page 7.
To order any option­
al accessory contact
your dealer or call
the toll-free accesso­
ry ordering number
(1-800-292-6066):
• UHF/VHF
Combiner;
(SBV1133A01)
• 75-300 Ohm
Adapter:
(SBV1113A01)
• 300-75 Ohm
Adapter:
(483521827003)
• Quick “F-type”
Extender:
(M61026)
For recessed
ANT/CABLE
connections.
Round Cable 75Q