Philips PS1944C - Manual (Page 11)

How
TO U se the V olume C ontrols
o
V()[,11MK CONTKOI.
T Jse the Volume control to set the
TV’s volume level on the TV
screen. The Volume level or scale
will be seen each time the VOLUME
buttons (on the TV or remote) are
pressed. (0 being the lowest, 63
being the highest.)
rr^^TT).
< 3 >
Press the MENU button on the
remote, then press the CH (+) or (-)
to scroll the on-screen menu until the
word VOLUME appears within the
highlight box.
Press the VOL (+) or (-) buttons
j to adjust the volume level.
<|> Press STATUS/EXIT button to
clear the screen.
1^
—
TINT 12
Al ON
¡VOLUME 1—15|
SOUND STEREO
SLEEP TIMER OFF
Try it out.
Press the VOL (-I-) or
(-) buttons. The
VOLUME indicator
should appear at the
bottom of the screen.
VOLUME 1— 15
When the Volume button is pressed
an on-screen display will appear.
How
TO U se the S ound (S tereo /M ono ) C ontrol
S iKKEo/MoNo TV S ound
~\7our TV can receive broadcast
J- stereo TV programs. The TV has
both an amplifier and twin speakers
through which the stereo sound can
be heard.
Press the MENU (M) button on
the remote, then the CHANNEL A or
T buttons to scroll the on-screen
menu until the word SOUND appears
within the highlight box.
Press the VOLUME (- h ) or (-)
buttons to set the SOUND control
to STEREO or MONO.
Press the STATUS button on the
remote control to clear the screen.
’
-----
--------
Al ON
VOLUME
M
----i5
¡SOUND STEREOI
SLEEP TIMER OFF
SETUP • ►
ON
-15
SOUND STEREO
SLEEP TIMER
SETUP
OFF
►
Remember, g
if the TV is set to
STEREO but the
current channel is
not broadcasted in
stereo, the sound at
the TV will remain
monaural, (mono.)
12
---------- J t " V
STEREO
NOTE: The TV's on-
screen “STEREO” indi­
cator appears whenever
the TV delects an
incoming stereo signal.
Be sure the TV’s
STEREO control is also
turned “ON” in order
for the stereo sound to
be heard through the
TV’s twin speaker sys­
tem.
1 1