Casio SF-7100SY - Manual (Page 70)

Data Communications
You can transfer data between two CASIO SF-7100SY, SF-7200SY units, or
between your Digital Diary and a personal computer. You can also transfer data
between your Digital Diary and the following CASIO Digital Diary Models:
SF-5590SY, SF-5790SY, SF-5990SY, SF-5590SYE, SF-5790SYE, SF-5990SYE,
SF-6500SY, SF-6700SY, SF-6900SY units.
•
Note that SF-5590SY, SF-5790SY, SF-5990SY, SF-5590SYE, SF-5790SYE, and
SF-5990SYE units can receive only 240 characters for each item. Because of this,
any data past the 240th character is automatically discarded by these units.
•
Your Digital Diary can send up to 511 characters per item.
Data communications can be performed while in the Telephone Directory, Memo,
Schedule Keeper, Calendar, To Do, Reminder, or Expense Manager Mode.
Data synchronizing helps you to make sure that the data in your PC and your Digital
Diary are always up to date.
■ Setting Up for Data Communications
The following describes what you would do to set up for data communications
between two Digital Diary units or between a Digital Diary unit and a personal
computer.
To connect to another Digital Diary unit
1. Make sure that the power of both units is turned off.
2. Open the covers of the data communications jacks of the two Digital Diary units.
3. Connect the two units using the SB-63 cable.
Important!
•
Be sure to close the connector covers of the Digital Diary units when you are not
performing data communications.